18 PB3 Mobile Printer User’s Guide
Using the Magnetic Stripe Reader
If your PB3 includes the optional magnetic stripe reader, follow the
next procedure to read cards.
PB3 Magnetic Stripe Reader Slot
To use the magnetic stripe reader
1 Position the card so the magnetic stripe faces the paper door.
2 Quickly swipe the card through the reader in either direction. The
Data and Status LED indicates card reading status as described in
“Understanding the LEDs” on page 3.
Cleaning cards for the magnetic stripe reader are available from
Intermec. For information, contact your local Intermec distributor.
Maintaining the Printer
To clean the exterior of the printer, use a soft cloth and mild cleaner.
Do not use abrasive cleaner, chemicals, or scouring pads, as these will
damage the finish.
Note: You need an application running on the host computer to read
data from the card. For more information, see the XSim Programmer’s
Reference Manual.
To Next Page
Loading...
Need help?
General
