Intermec PB32 User Manual

Chapter 1 — Using the PB22 and PB32 Mobile Label and Receipt Printer
PB22 and PB32 Mobile Label and Receipt Printer User Guide 21
Understanding Pause Mode
Use Pause mode to momentarily stop printing or to cancel a current
print job. When you pause the printer, the Pause mode screen appears.
Use the Feed button to both pause and resume printing.
The PB22 and PB32 in Pause Mode
To enter Pause mode
• Press the Feed button while the printer is printing.
To resume printing
• Press the Feed button.
To cancel a print job
1 Press the Feed button to pause printing (Fingerprint, IPL, or
ESC/P).
2 Press the Information button (or soft key) to cancel the print
job (Fingerprint or IPL) or press and hold the Pause button in
ESC/P.
Understanding Setup Mode
Use Setup mode to change the settings on the printer.
Sample Setup Mode Screen
CANCEL
PAUSE
PAUSE
OK
SETUP:
SER-COM

Intermec PB32 Specifications

General

Print Resolution	203 dpi
Connectivity	USB
Media Type	Labels, tags
Supported Barcode Types	Code 39, Code 128, UPC-A, UPC-E, EAN-8, EAN-13, Interleaved 2 of 5, Codabar, Postnet, PDF417, Data Matrix, QR Code
Print Speed	Up to 4 ips (101.6 mm/sec)