Chapter 2 — Configuring the PB22 and PB32
38 PB22 and PB32 Mobile Label and Receipt Printer User Guide
Use the next sections to set most of your wireless communication
settings. For help with additional commands and information, see
either the Intermec Fingerprint Developer’s Guide or the IPL
Developer’s Guide. You can download both documents from the
Intermec website at www.intermec.com.
Configuring Wireless Printing Using IPL
Use these procedures to configure your printer with IPL for wireless
printing.
To configure the printer to use WEP authentication
1 Send these commands to login as an admin and set the SSID:
<STX><ESC>.x,su -p pass admin<ETX>
<STX><SI>ws,SSID,xxxxx<ETX>
where xxxxx can be from 0 to 32 alphanumeric characters.
Understanding the 802.11 Radio Icons
Icon Description
Excellent signal
Strong signal
Good signal
Weak signal
Poor signal
No signal
Note: The default password for logging in as an admin is “pass.” If
you changed the password, you need to use your password instead
of “pass.”
To Next Page
Loading...
