Intermec PB32 - Connecting the Printer to Your PC; Connecting the Printer Through the USB Interface

Chapter 2 — Configuring the PB22 and PB32
30 PB22 and PB32 Mobile Label and Receipt Printer User Guide
Connecting the Printer to Your PC
You can easily connect to the printer to your PC using one of these
ports:
• USB port
• RS-232 serial interface port
Connecting the Printer Through the USB Interface
To connect the printer to your PC using the USB port, you need a USB
cable (P/N 321-611-xxx) and to install Intermec InterDriver®
software. To make sure you have the latest version of InterDriver, you
may want to go to the downloads page for the printer on http://
www.intermec.com/support/downloads/index.aspx.
To connect the printer through a USB port
1 Open the Interdriver executable.
2 The File Download - Security Warning screen appears. Click Run
to run the executable. The Intermec End User License Agreement
screen appears.
3 Read the agreement and select the radio button to accept the
agreement, and then click Next. The Installation Directory screen
appears.
4 The default installation directory is c:\Intermec\InterDriver7.
Click Next to use the default directory or specify a different
location to install the files. The Installation Information screen
appears.
5 Clear the Run Add Print Wizard after unpacking drivers check
box and click Finish.
6 On the New Hardware Wizard screen, select Install from a list or
specific location and then click Next to continue.
7 On the Search and Installation Options screen, click Next.
Note: For LPT connections, you must restart your computer for
Windows to detect the new hardware. For USB connections, the
New Hardware Wizard automatically launches when the printer is
connected and turned on.