Interra ITR102 - Page 15

KNX Universal Interface
Product Manual
©2019 INTERRA 15 PM190207005BEN
PARAMETER
DESCRIPTION
VALUES
longer a dimmer telegram is sent via “Dimming”
object. When the button is released after a long
press a “stop” telegram is sent.
Direction
1
This parameter determines the behaviour of the
button when “dimming with 2 buttons” has been
selected.
Up: when the contact is closed briefly the value
“on” is sent via “On/Off” object. Otherwise if the
the push-button is pressed longer the value “Up”
is sent via “Dimming” object.
Down: when the contact is closed briefly the value
“off” is sent via “On/Off” object. Otherwise if the
the push-button is pressed longer the value
“Down” is sent via “Dimming” object.
Up
Down
Long Press Duration
This parameter determines the minimum period
for detecting a long push button action.
0.4 sec
0.5 sec
0.6 sec
0.7 sec
0.8 sec
0.9 sec
1.0 sec
Locking
This parameter determines if the input can be
locked via an additional locking object or not.
Disabled: This option is disabled.
Lock On Value 0: When the locking
communication object takes the value 0, status
changes at the input are not transmitted.
Lock On Value 1: When the locking
communication object takes the value 1, status
changes at the input are not transmitted.
Disabled
Lock On Value 0
Lock On Value 1
1
This parameter is only visible when the parameter “Selection” is set to “Dimming with 2 Buttons”.