Interra ITR102 - Objects

KNX Universal Interface
Product Manual
©2019 INTERRA 20 PM190207005BEN
3.5.3. Objects
The following objects can be used through the value function:
OBJ NAME
FUNCTION
TYPE
FLAG
InputX
Value
*
CRT
Value telegrams are sent via the group address linked with this object.
InputX
Locking
1 bit
CRWU
This object is only visible when the locking function is enabled. Via the group address linked, it is possible to
lock the current input through the value configured previously.
* The type of value depends on the selection parameter.