Interra ITR102 - Value; Description; Parameters

KNX Universal Interface
Product Manual
©2019 INTERRA 19 PM190207005BEN
3.5. VALUE
3.5.1. Description
This function is used to send a value defined
previously. It is possible to choose between five
differents types of values:
- 1-Byte Value: It can be used for recalling
scenes.
- 2-Byte Value
- Percentage
- Temperature
- Luminosity
3.5.2. Parameters
PARAMETER
DESCRIPTION
VALUES
Selection
This parameter determines the type of value that
will be sent.
1-Byte Value: Takes integer values from 0 to
255.
2-Byte Value: Takes integer values from 0 to
65535.
Percentage: 1 byte in steps of 1.
Temperature: 2 byte in steps of 0.5.
Luminosity: 2 byte in steps of 50.0.
0…255
0…65535
0…13…100%
0…20.0…50.0°C
0…300…1000 lux
On Press / On Release
This parameter determines the behaviour of the
button.
Send / - : when the contact is closed the selected
value is sent.
- / Send: when the contact is opened the
selected value is sent.
Send / -
- / Send
Locking
This parameter determines if the input can be
locked via an additional locking object or not.
Disabled: This option is disabled.
Lock On Value 0: When the locking
communication object takes the value 0, status
changes at the input are not transmitted.
Lock On Value 1: When the locking
communication object takes the value 1, status
changes at the input are not transmitted.
Disabled
Lock On Value 0
Lock On Value 1