Intertek MBU 400 - Antenna Requirement; Digital Modulation Techniques

INTERTEK TESTING SERVICES
Test Report Number: HK08060834-1 Page 18 of 72
FCC ID: T7HCT8015
Company: RTX Consumer Products Hong Kong Ltd. Date of Test: June 24-July 7, 2008
Model: MBU 400
4.0 Measurement Results
4.1 Antenna Requirement, FCC Rule 15.317:
EUT must meet the antenna requirement of FCC Rule 15.203.
[ × ]
EUT uses a permanently attached antenna which is considered sufficient to
comply with the provisions of this rule. Please refer to Exhibit 5: Internal Photos
for more details.
[ × ]
EUT uses a unique antenna jack or electrical connector which is considered
sufficient to comply with the provisions of this rule. Please refer to Exhibit 5:
Internal Photos for more details.
4.2 Digital Modulation Techniques, FCC Rule 15.319(b):
All transmissions must use only digital modulation techniques.
The requirements are made in accordance with ANSI C63.17 sub-clause 6.1.4.
Attestation:
Please refer to the technical description in section 2.2 or relevant DECT standards for
more details.