EasyManua.ls Logo

Intertek MBU 400 - User Manual

Default Icon
74 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
Intertek Testing Services Hong Kong Ltd.
2/F., Garment Centre, 576 Castle Peak Road, Kowloon, Hong Kong.
Tel: (852) 2173 8888 Fax: (852) 2785 5487 Website: www.hk.intertek-etlsemko.com
July 30, 2008
RTX Consumer Products Hong Kong Ltd.
11/F., CAC Tower,
165 Hoi Bun Road, Kwun Tong,
Kowloon, Hong Kong.
Tel. : 852-2487-3718
Fax : 852-2480-6121
Dear Preben Rasmussen:
Enclosed you will find your file copy of a Part 15 Certification (FCC ID: T7HCT8015).
For your reference, TCB will normally take another 15 to 20 days for reviewing the
report. Approval will then be granted when no query is sorted.
Please contact me if you have any questions regarding the enclosed material.
Sincerely,
Leung Wai Leung, Tommy
Senior Manager
Enclosure

Table of Contents

Question and Answer IconNeed help?

Do you have a question about the Intertek MBU 400 and is the answer not in the manual?

Intertek MBU 400 Specifications

General IconGeneral
BrandIntertek
ModelMBU 400
CategoryTest Equipment
LanguageEnglish

Summary

Exhibit 1 Summary of Test Results

Exhibit 2 General Description

Product Description

The MBU 400 is a 1.9GHz DECT VoIP and PSTN Gateway with specific frequency range and channels.

Technical Description

Details on circuit description and digital modulation techniques are provided in a separate file.

Related Submittal(s) Grants

Application for Certification of a Part 15 Unlicensed PCS Base Station, also subject to Part 68 Registration.

Test Methodology

Describes procedures for radiated and conducted emissions using ANSI C63.4 and C63.17 standards.

Test Facility

Details the location of the open area test site and conducted measurement facility used by Intertek.

Exhibit 3 System Test Configuration

Justification

Explains setup for emissions testing, ensuring continuous transmission in burst mode with pseudo-random data.

Conducted Emission Test Configuration

Diagram and description of test setup for conducted emissions, using ANSI C63.17.

Conducted Monitoring and Operational Test Configuration

Diagram of test setup for monitoring and operational tests, involving signal generators.

EUT Exercising Software

Details the software used to exercise system components during testing for normal operation.

Exhibit 4 Measurement Results

Antenna Requirement

Confirms the EUT meets antenna requirements as per FCC Rule 15.317.

Emission Bandwidth

Presents measured emission bandwidth results for traffic and dummy carriers within specified limits.

Peak Transmit Power

Lists measured peak transmit power values for traffic and dummy carriers against specified limits.

Power Spectral Density

Shows measured power spectral density against the limit of 4.8dBm/3kHz.

Unwanted Emission Inside the Sub-Band

Presents results for emissions within the sub-band, complying with specified mask requirements.

Emissions Outside the Sub-Band

Shows results for emissions outside the sub-band, attenuated below a reference power.

Radio Frequency Radiation Exposure

EUT evaluated for MPE compliance, results saved as RF exposure info.pdf.

Carrier Frequency Stability

Details carrier frequency stability under various supply voltage and temperature conditions.

Least Interfered Channel (LIC) Selection

Describes the process for selecting the least interfered channel for spectrum access.

Monitoring Time

EUT monitors channels for at least 10ms before initiating transmission.

Maximum Transmit Period

Tests maximum transmission duration, ensuring it does not exceed limits without re-checking access criteria.

System Acknowledgement

Checks timing for system acknowledgments and ceasing traffic channel transmission.

Fair Access

Manufacturer declares no mechanisms used to deny fair access to spectrum.

Exhibit 5 Equipment Photographs

Equipment Photographs

Photographs of the EUT are saved as external photos.pdf and internal photos.pdf.

Exhibit 6 Product Labelling

Product Labelling

FCC ID label artwork and its location are saved as filename: label.pdf.

Exhibit 7 Technical Specifications

Technical Specifications

Block diagram and circuit diagram are saved as filename: block.pdf and circuit.pdf respectively.

Exhibit 8 Instruction Manual

Instruction Manual

Preliminary copy of the Instruction Manual saved as manual.pdf, includes FCC Information to the User.

Exhibit 9 UTAM Affidavit

UTAM Affidavit

A copy of the UTAM affidavit is saved as filename: utam.pdf.

Exhibit 10 Letter of Agency

Letter of Agency

A copy of the Letter of Agency is saved as filename: letter of agency.pdf.

Exhibit 11 Confidentiality Request

Confidentiality Request

A copy of the Confidentiality Request is saved as filename: request.pdf.