EasyManua.ls Logo

Intertek MBU 400 - System Acknowledgement

Default Icon
74 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
INTERTEK TESTING SERVICES
Test Report Number: HK08060834-1 Page 50 of 72
FCC ID: T7HCT8015
Company: RTX Consumer Products Hong Kong Ltd. Date of Test: June 24-July 7, 2008
Model: MBU 400
4.20 System Acknowledgement, FCC Rule 15.323(c)(4):
Once access to specific combined time and spectrum windows is obtained an
acknowledgment from a system participant must be received by the initiating
transmitter within one second or transmission must cease. Periodic acknowledgments
must be received at least every 30 seconds or transmission must cease. Channels
used exclusively for control and signaling information may transmit continuously for 30
seconds without receiving an acknowledgment, at which time the access criteria must
be repeated.
Measurements are made in accordance with ANSI C63.17 sub-clause 8.1.1 and 8.2.1.
Test setup is shown in section 3.3 Figure 3.3.1.
Test Results:
[ × ]
Timing for EUTs using control and signaling channel type transmissions:
Conditions Transmission
Duration
(seconds)
Limit
(seconds)
Results
Time needed to repeat access criteria 1.28 30 Pass
[ × ]
Timing for EUTs using communications channel type transmissions:
Conditions Transmission
Duration
(seconds)
Limit
(seconds)
Results
Activate EUT w/ companion device off NA 1 NA
Time needed to cease Traffic Channel 4.90 30 Pass
NA - Not applicable

Table of Contents