EasyManua.ls Logo

Intertek MBU 400 - Maximum Reaction Time

Default Icon
74 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
INTERTEK TESTING SERVICES
Test Report Number: HK08060834-1 Page 53 of 72
FCC ID: T7HCT8015
Company: RTX Consumer Products Hong Kong Ltd. Date of Test: June 24-July 7, 2008
Model: MBU 400
4.23 Maximum Reaction Time, FCC Rule 15.323(c)(7).2:
The monitoring system bandwidth must have a maximum reaction time less than 50 x
SQRT (1.25/emission bandwidth B in MHz) µs for signals at the applicable threshold
level but shall not be required to be less than 50 µs. If a signal is detected that is 6 dB
or more above the applicable threshold level, the maximum reaction time shall be 35 x
SQRT (1.25/emission bandwidth B in MHz) µs but shall not be required to be less than
35 µs.
Measurements are made in accordance with ANSI C63.17 sub-clause 7.5. Test setup is
shown in section 3.3 Figure 3.3.1.
Test Results:
Test Reaction of EUT Results
1
With Interference Pulse, 50µs
B Pass
2
With Interference Pulse, 35µs
B Pass
A Could be connected in at least one channel
B Could not be connected in all channels
NA – Not applicable

Table of Contents