Intex ECO20110-2 User Manual

A WARNING
Improper tank valve and clamp assembly could cause the valve and clamp to blow off
and cause serious injury, property damage or death.
6-way valve installation:
1. Lower the 6-way valve over the tank slowly, and ensure the bypass pipe protruding
underneath the 6-way valve fits securely into the center pipe hub (7) top opening
(see
drawing 19).
IMPORTANT: There are three
hose connection ports on the 6-way valve, ensure the
outlet connect i on (from filter to the pool) on the valve is facing towards the pool, and the
inlet c onnection (from motor to valve) is aligned with the motor outlet (see drawing 20).
2. Remove the clamp bolt, and install the clamp around the tank and 6-way valve flanges,
then replace the clamp bolt and use a phillips screwdriver (not included) to tighten it
(see
drawing 21).

Intex ECO20110-2 Specifications

General

Brand	Intex
Model	ECO20110-2
Category	Water Filtration Systems
Language	English