(187IO) MODEL ZS8220 & ZS8230 OZONE & SALTWATER SYSTEM ENGLISH 7.5” X 10.3” PANTONE 295U 08/01/2012
187A
SAVE THESE INSTRUCTIONS
Page 7
English
PRODUCT INFORMATION/SPECS
This product is specially designed for above ground pools. It will destroy the
bacteria, oxidize bather organics and control algae, which provide a safe, clean and
comfortable swimming pool.
Common salt (sodium chloride) is made up of two elements, sodium and chloride.
During the installation of your Ozone & Saltwater System, a measured quantity
of salt is dissolved in the pool water to make it slightly salty. The pool water flows
through the Ozone & Saltwater System’s electrolytic cell to produce chlorine. The
chlorine dissolves in the water and instantly starts destroying bacteria and algae. It
also oxidizes all other organic materials.
Ozone is made by drawing air through Corona Discharge (CD) cells that break
down oxygen molecules, which then recombine into ozone molecules. Ozone gas
is introduced to the pool circulation line using a venturi injector. Water passing
through the injector creates a suction that pulls the ozone gas into the water. The
ozone dissolves in the water. Ozone can oxidize some contaminants and most
bacteria.
HOW THE CHLORINE IS GENERATED
Wattage: 125W
Ideal Salt Level: 3000 ppm (parts per million)
Maximum Chlorine Output/hour: 11 grams/hour
Ozone Output: 150 mg/hour
Filter pump minimum flow rate: 1500 ~ 4000 gallons/hour
(5680 - 15140 liters/hour)
Limited Warranty: see “Limited Warranty”
HOW OZONE IS GENERATED
PRODUCT SPECIFICATIONS
Ozone Generator
Hose from
Filter Pump
Flow Sensor
Electronic
Control Station
Electrolytic Cell
Power Switch
Hose Returning
Water to Pool
To Next Page
Loading...
Need help?
General
