Intex PureSpa SJB-HS-20-1C - Quick Start Guide; Initial Setup and Heating Tips

299
A
S AVE THESE INSTRUCTIONS
(299IO) SPA (JET + BUBBLE) ENGLISH 7.5” X 10.3” PANTONE 295U 08/20/2018
English
Page 28
Ifthereisaneedtoreplacetheltermotor(forqualiedtechnicianonly),followbelowstepsto
disassemble it:
IMPORTANT:
You must drain out any remaining water inside the piping system of the control base
before replacing any parts.
Tools required:
One adjustable wrench and one Philip screwdriver.
NOTE:
The“specialwrenchtool”isincludedwiththenewlterpumpmotorreplacementandnot
with the spa set.
FILTER PUMP MOTOR DISASSEMBLY
1 2 3
4 5 6