To Next PageTo Next PageWhy does my Intex PureSpa SJB-HS-20-1C Swimming Pool keep tripping the household circuit breaker?
If the household circuit breaker trips when using your Intex Swimming Pool, ensure the circuit breaker has the correct rating. If it is overloaded, provide a dedicated circuit breaker feeding the spa electrical outlet only. If there's an electrical fault in the line, professional help is needed.
What to do if the Intex PureSpa SJB-HS-20-1C has no display or the spa control unit does not work?
If the Intex Swimming Pool's display isn't working or the spa control unit is unresponsive, first, ensure the spa is properly plugged in and switched on. Then, check that the control panel cable plug is firmly attached to the control base receptacle. Also, verify the power source and reset the RCD if it has tripped. If the RCD is broken, further assistance is needed.
What does E91 mean on my Intex PureSpa SJB-HS-20-1C Swimming Pool and how to fix it?
If your Intex Swimming Pool displays an E91 error, remove the electrolytic cell for inspection. Clean it if necessary to remove any dirt or scale on the titanium plates.
What to do if my Intex Hot Tub jets output are weak?
If your Intex Hot Tub jets have weak output: * Add water between the MIN and MAX level. * Ensure the suction inlet is not covered or blocked. * Clean any dirt inside the jet nozzles. If the jet nozzles plumbing pipes are damaged, contact Intex Service Center.
What to do if the jet air control knob is not working on my Intex Hot Tub?
If the jet air control knob on your Intex Hot Tub isn't working, clean any dirt inside the jet nozzles. If the jet airflow plumbing inside the spa tub is damaged, contact Intex Service Center.
What to do if my Intex Hot Tub is not heating properly?
If your Intex Hot Tub isn't heating properly, first, make sure the temperature is set high enough and the spa cover is attached. A dirty filter cartridge can also cause this, so clean or replace it. If the heater is in STANDBY mode, press the flame button twice to heat the water to the set temperature. If the heating element has failed, contact Intex Service Center.
How to fix Intex PureSpa SJB-HS-20-1C Swimming Pool tub that loses air pressure?
If your Intex Swimming Pool tub is losing air pressure, ensure the air valve cap is securely closed. If that's not the issue, fill up the spa tub with air and make sure the air valve base is tight. If there is still a leak, put liquid soap and water in a squirt bottle and spray on the seams to check for holes, cuts, or splits.
How to clean my Intex PureSpa SJB-HS-20-1C water when it is not clean?
If the water in your Intex Swimming Pool is not clean, ensure the cartridge assembly is properly attached. Insufficient filtering time could be the issue, so increase it. Also, a dirty filter cartridge can cause this, so clean or replace it. Maintain proper water sanitation, following the chemical manufacturer’s instructions, and check and clean the filtration inlet and outlet regularly.
How to clean Intex PureSpa SJB-HS-20-1C Swimming Pool water?
If the water in your Intex Swimming Pool is not clean, ensure the cartridge assembly is properly attached. Also, increase the filtration time and clean or replace the filter cartridge as needed. Maintain proper water sanitation following the chemical manufacturer’s instructions. Regularly check and clean the filtration inlet and outlet.
How to fix Intex Hot Tub error E90?
To address the E90 error on your Intex Hot Tub, start by turning off and unplugging the control unit. Ensure the outlet cover grid is clean and free from obstructions. Clean or replace the cartridge. Verify that the inlet/outlet connections on the spa tub and filter pump are not blocked. Keep the spa water properly sanitized to ensure a clean and unclogged filter cartridge. Release trapped air by unscrewing the drain valve cap, and then run the filter function. If the problem continues, contact Intex Service Center.
General| Brand | Intex |
|---|---|
| Model | PureSpa SJB-HS-20-1C |
| Category | Swimming Pool |
| Language | English |
Key risks like drowning, electric shock, and product safety guidelines.
Warnings on health, proper assembly, and electrical connection safety.
Guidelines for RCD testing and maintaining water chemistry.
Comprehensive list of all components with reference numbers and part codes.
Technical details, indoor/outdoor installation needs, and site preparation.
Steps for assembling the control unit and inflating spa components.
Procedures for deflating the spa and installing the control unit.
Guidance on salt type, optimal levels, and procedures for adding/removing salt.
Overview of the control panel and how to operate heating, jets, and filtration.
How to set water temperature and adjust jet nozzle output.
Instructions for activating, setting hours, managing, and testing the sanitation system.
Explains various LED readings and their meanings for troubleshooting.
Guidelines for maintaining clean, sanitized, and balanced spa water.
Details on Calcium Hardness, Saturation Index, and TA/pH adjustment procedures.
Procedures for cleaning filter cartridges, the electrolytic cell, and maintaining water quality.
Steps for draining, cleaning the tub, and operating the spa cover.
Instructions for repairing inflatable parts and storing the spa properly.
Solutions for problems like power, heating, jets, and filtration.
Solutions for shape, leaks, noise, insufficient chlorine, and blower issues.
Guidance on interpreting LED codes and resolving system errors.
Details warranty coverage, exclusions, and how to make a claim.
Essential tips on power, water heating, RCD, filter, unfolding, and inflation.
Guidance on maintaining water temp and proper spa cover usage.
Instructions for using the repair kit to fix punctures.
