To Next PageTo Next PageWhat to do if the filtration pump is not working on my Intex PureSpa SJB-HS-20-1C?
If the filtration pump on your Intex Swimming Pool isn't working, clean or replace the filter cartridge in time. Also, check and clean the filtration inlet and outlet regularly. If the filter pump motor has failed, further assistance is needed.
What to do if the jet function does not work on my Intex PureSpa SJB-HS-20-1C?
If the Intex Swimming Pool jet function isn't working, turn off and unplug the spa. Let it cool down completely before restarting.
Why are the jets weak in my Intex Swimming Pool?
If the jets output on your Intex Swimming Pool are weak, ensure the water level is between the MIN and MAX levels. Check for any obstructions in the suction inlet inside the tub and ensure it's not covered or blocked. Clean any dirt inside the jet nozzles. If the jet nozzles plumbing pipes are damaged, further assistance is needed.
How to fix an Intex PureSpa SJB-HS-20-1C jet air control knob that is not working?
If the jet air control knob on your Intex Swimming Pool isn't working, clean any dirt inside the jet nozzles. If the jet airflow plumbing inside the spa tub is damaged, further assistance is needed.
Why is there insufficient chlorine in my Intex PureSpa SJB-HS-20-1C?
If you have insufficient chlorine in your Intex Swimming Pool, increase the sanitation system operating time and ensure the heater is off during the sanitation process. Use a spa cover when the spa is not in use or when the sanitation system is operating. If the bather load has increased, increase the sanitation system operating time and test the water using test strips. Check and clean the electrolytic cell if it is clogged or dirty.
What to do if the bubble air blower does not work on my Intex PureSpa SJB-HS-20-1C?
If the bubble air blower on your Intex Swimming Pool isn't working, turn off and unplug the spa. Let it cool down before restarting.
How to level pump connectors with spa connectors on Intex PureSpa SJB-HS-20-1C Swimming Pool?
If the pump connectors are not level with the spa connectors on your Intex Swimming Pool, elevate the pump with wood or another type of insulated material to bring the pump’s connectors level with the spa’s connectors.
Why does my Intex PureSpa SJB-HS-20-1C tub have a strange shape?
If the tub of your Intex Swimming Pool has a strange shape, avoid exposing the spa to direct sunlight for extended periods. Check the air pressure and release air if necessary, especially during hot weather, to avoid damage to the tub.
How to fix an Intex PureSpa SJB-HS-20-1C Swimming Pool tub that loses air pressure?
If your Intex Swimming Pool tub is losing air pressure, ensure the air valve cap is securely closed. If the air valve base is loose, fill the spa tub with air and tighten the air valve base. If there's a hole, cut, or split on the spa tub, apply liquid soap and water to find the leak, then clean and dry the area before applying the repair patch.
How to stop leaking between spa tub and control unit connectors on Intex PureSpa SJB-HS-20-1C?
If there's leaking between the spa tub connectors and control unit connectors on your Intex Swimming Pool, tighten the inlet and outlet connections. Also, coat the O-ring with petroleum jelly for a waterproof seal. Ensure the inlet/outlet O-ring is in place, clean, and not damaged.
General| Brand | Intex |
|---|---|
| Model | PureSpa SJB-HS-20-1C |
| Category | Swimming Pool |
| Language | English |
Key risks like drowning, electric shock, and product safety guidelines.
Warnings on health, proper assembly, and electrical connection safety.
Guidelines for RCD testing and maintaining water chemistry.
Comprehensive list of all components with reference numbers and part codes.
Technical details, indoor/outdoor installation needs, and site preparation.
Steps for assembling the control unit and inflating spa components.
Procedures for deflating the spa and installing the control unit.
Guidance on salt type, optimal levels, and procedures for adding/removing salt.
Overview of the control panel and how to operate heating, jets, and filtration.
How to set water temperature and adjust jet nozzle output.
Instructions for activating, setting hours, managing, and testing the sanitation system.
Explains various LED readings and their meanings for troubleshooting.
Guidelines for maintaining clean, sanitized, and balanced spa water.
Details on Calcium Hardness, Saturation Index, and TA/pH adjustment procedures.
Procedures for cleaning filter cartridges, the electrolytic cell, and maintaining water quality.
Steps for draining, cleaning the tub, and operating the spa cover.
Instructions for repairing inflatable parts and storing the spa properly.
Solutions for problems like power, heating, jets, and filtration.
Solutions for shape, leaks, noise, insufficient chlorine, and blower issues.
Guidance on interpreting LED codes and resolving system errors.
Details warranty coverage, exclusions, and how to make a claim.
Essential tips on power, water heating, RCD, filter, unfolding, and inflation.
Guidance on maintaining water temp and proper spa cover usage.
Instructions for using the repair kit to fix punctures.
