- Reclining backrest 0° - 30° - 43 or 51 cm backrest height.
Angle can be adjusted very easily which provides a comfortable
rest position :
Simultaneously pull the levers (A) to provides the same angle
on both sides, release the levers when you reach the desired
angle.(Photo 5)
Mechanical version
There are 4 angles position by step of 10°.
Note : Push on the backrest canes before operating the
levers, this is to release the auto-locked security system.
(Photo
5A).
Gas strut version (0° to 30° continuously (Photo 6).
Pneumatic jacks provides help to raised the user by the attendant,
always operated with the user sited in the wheelchair.
It is recommended that this operation be performed
only by the attendant. Always make sure that the backrest is
locked in place to ensure perfect safety for the user.
Keep away ngers from moving parts (levers, cylinders,
mechanisms, etc.) to prevent injuries !
Avoid operating levers (A) (photo 6) during a sideways transfer,
for example, in order to prevent destabilising the user’s posi-
tion !
To ensure safety for the user, when backrest is reclined, we
recommend to use anti-tippers (available as an option).
Maintenance of reclining backrest mechanism varies with
use. Please contact your Dealer.
Based upon the development of your disability, you can
choose an Action
3
backrest that meets your needs. Please
consult with your Dealer.
5
A
To Next Page
Loading...
