21
- Footrests (photo 11 & 12) : the footplate can be lifted during
transfers footrests are height adjustable and can be equipped
with a xed or articulated footplate (optional). Loosen the
screw (A) to adjust to the desired height, rmly tighten the
screw after adjustment.
The footplate can be articulated by indexed plate (optional)
loosen the screw (B), adjust to the desired angle and tighten
securely.
- Straps : to ensure a good position of the feet, two types of
straps can be provided; the heelrest strap (plain or adjustable
by Velcro fasteners) and the calfpad strap attached to the foo-
trest support are both adjustable by Velcro fasteners.
Note : the standard footrest supports and legrests are moun-
ted in pairs on the wheelchair; whenever you remove them,
remember that you have a right side and a left side !
Never lift the wheelchair by the footrest supports or
legrests !
Keep your ngers away from movable parts during folding,
disassembling or adjustment to prevent injuries !
2.1.5 Armrests
- Removable :
• Simple [1] (photo 13 and 14) : to remove armrests, simply
pull them up. Previously, press on the push pin (B) located
at the bottom of the armrest vertical upright. Reverse the
procedure to reinstall them. To adjust their height (3 posi-
tions), remove the screw (A), adjust to the desired height and
reposition the screw (A), tighten without forcing.
13
A
14
11 12
B
A
B
To Next Page
Loading...
