Invacare Action 3 - 2.3.1 Wheels (continued); 2.3.2 Handrims

24
25
Comply with the ination pressure specied on the sidewall
of the tyre.
Note : remember that in order to maintain the interchangea-
bility of the chair wheels equipped with quick-release axles,
the pressure in the two tyres should be the same.
!
Never exceed the pressure specied on the sidewalls of
the tyre, otherwise, the tyre may explode and cause injuries !
 Pneumatic tyres wear out. In addition, the roughness
of the ground surface and driving have an impact on their
longevity. Replace them regularly to avoid trouble caused by
puncture.
Please consult with your Dealer.
2.3.2 Handrims
They provide the wheelchair propulsion. They can be made
of anodized aluminium, chrome steel or coated with nonslip
plastic (optional).
Note : A handrim with spigot kit (photo 19) for people who
have grasping difculties is available optionally.
 The mounting and positioning must be performed by a
professional technician upon agreement by prescribing
physician. Please consult with your dealer.
!
Handrims are constantly in contact with your hands.
Make sure that they are not damaged !
19