59
9.2 Drive Wheels
INFLATION:
Locate air valve and remove air cap.
Check the pressure rating marked on the side of the tyre and inflate as necessary.
CAUTION:
Do not over inflate tyres. As with any vehicle, the wheels and tyres should be checked periodically for wear.
REMOVAL:
• Release and remove the central screw (B)
and the four surrounding screws (A) using
a hex wrench.
• Pull the wheel away from the chair. It may
be necessary to use some force.
CAUTION:
If the wheel rim is to be spilt to change a
tyre, it is important that the bolts (C) holding
the rim are not released if the tyre is
pneumatic and inflated.
A
B
C
To Next Page
Loading...
