INVENTOR MGHP-12 - Double-Hung Sash Window Installation

INSTALLATIONINSTRUCTIONS(optional)
10
Installationinadouble-hungsash
window
1.Cutthefoamseal(adhesivetype)totheproperlengthand
attachittothewindowstool.Fig.8
2.Attachthewindowsliderkittothewindowstool.Adjustthe
lengthofthewindowsliderkitaccordingtothewidthof
window,shortentheadjustablewindowkitifthewidthof
windowislessthan26.5inches
Openthewindowsashandplacethewindowsliderkiton
thewindowstool.Fig.9
3.Cutthefoamseal(adhesivetype)totheproperlength
andattachitonthetopofthewindow.ShownasinFig.10
4.Closethewindowsashsecurelyagainstthewindow.
5.Cutthefoamsealtoanappropriatelengthandsealthe
opengapbetweenthetopwindowsashandouterwindow
sash.ShownasinFig.11.
FoamsealA
(adhesivetype)
Foamseal
Fig.8
Fig.9
Fig.10
Fig.11
Windowkit
Windowstool
Windowkit
Windowstool
26.5 ~48.0