To Next PageTo Next PageWhat to do if Invertek Drives ODE-3-140041-3F12 displays 'Motor Thermal Overload (I2t)'?
If the Invertek Drives DC drive displays 'Motor Thermal Overload (I2t)', check that the supply voltage is within the allowed tolerance for the drive.
Why does my Invertek Drives ODE-3-140041-3F12 show Output Over Current?
If the Invertek Drives DC drive trips due to output over current, after delivering more than 100% of the value set in P-08 for a certain time, it is designed to prevent motor damage. This can be caused by excess load or shock load on the motor.
What to do for Autotune Fault on Invertek Drives DC Drives?
If the Invertek Drives DC drive shows an Autotune Fault, where the motor parameters measured during autotune are incorrect, check the motor cable and connections for continuity.
How to fix brake channel over current on Invertek Drives ODE-3-140041-3F12?
To address a brake channel over current issue in your Invertek Drives DC drive, check the external brake resistor's condition and the connection wiring.
What does Brake resistor overload mean on Invertek Drives ODE-3-140041-3F12 DC Drives?
If the Invertek Drives DC drive indicates a brake resistor overload, it means the drive has tripped to prevent damage to the brake resistor.
How to resolve over voltage on DC bus in Invertek Drives ODE-3-140041-3F12 DC Drives?
If the Invertek Drives DC drive reports an over voltage on the DC bus, especially during deceleration or stopping, increase the deceleration time in parameter P-04. Alternatively, install a suitable brake resistor and activate the dynamic braking function using parameter P-34.
Why is my Invertek Drives ODE-3-140041-3F12 showing 'Drive internal temperature too high'?
If the Invertek Drives DC drive reports 'Drive internal temperature too high', it means the drive's ambient temperature is too high. Ensure adequate cooling air is provided to the drive.
What causes Motor PTC thermistor trip on Invertek Drives ODE-3-140041-3F12?
If the Invertek Drives DC drive trips because of motor PTC thermistor over temperature, it means the connected motor thermistor has detected over temperature. Check the wiring connections and the motor itself.
What does Output Fault mean on Invertek Drives ODE-3-140041-3F12 DC Drives?
If the Invertek Drives DC drive indicates an output fault, which may be due to a missing phase or unbalanced motor phase currents, check the motor and its connections.
How to fix heatsink over temperature on Invertek Drives ODE-3-140041-3F12?
If the Invertek Drives DC drive's heatsink is overheating, ensure the ambient temperature around the drive is within the specified limits.
General| Model | ODE-3-140041-3F12 |
|---|---|
| Category | DC Drives |
| Input Voltage | 380-480VAC |
| Input Phase | 3 |
| Output Current | 41A |
Crucial safety warnings and precautions for installation, operation, and maintenance of the drive.
A step-by-step guide for quickly installing and commissioning the Optidrive.
Schematic illustrating power and control terminal connections for the drive.
Guidelines for proper grounding and safety earth conductor connections.
Instructions for connecting the main AC power supply to the drive terminals.
Guidance on connecting the motor to the drive's output terminals (U, V, W) and earthing.
Details of default and available functions for digital and analog control terminals.
Description of keypad buttons and their functions for drive control and parameter access.
Step-by-step guide for navigating and modifying drive parameters via the keypad.
Procedure to clear fault conditions and allow the drive to restart.
Detailed descriptions of basic drive parameters, their ranges, and default values.
Descriptions of advanced parameters for fine-tuning drive functions and performance.
List of fault codes, their descriptions, and suggested troubleshooting steps.
