To Next PageTo Next PageWhat to do if Invertek Drives ODE-3-140041-3F12 DC Drives shows 'Under voltage on DC bus'?
If your Invertek Drives DC drive displays an 'Under voltage on DC bus' error during operation, it means the incoming supply voltage is too low. Check the incoming power supply voltage and all components in the power feed line to the drive.
General| Model | ODE-3-140041-3F12 |
|---|---|
| Category | DC Drives |
| Input Voltage | 380-480VAC |
| Input Phase | 3 |
| Output Current | 41A |
Crucial safety warnings and precautions for installation, operation, and maintenance of the drive.
A step-by-step guide for quickly installing and commissioning the Optidrive.
Schematic illustrating power and control terminal connections for the drive.
Guidelines for proper grounding and safety earth conductor connections.
Instructions for connecting the main AC power supply to the drive terminals.
Guidance on connecting the motor to the drive's output terminals (U, V, W) and earthing.
Details of default and available functions for digital and analog control terminals.
Description of keypad buttons and their functions for drive control and parameter access.
Step-by-step guide for navigating and modifying drive parameters via the keypad.
Procedure to clear fault conditions and allow the drive to restart.
Detailed descriptions of basic drive parameters, their ranges, and default values.
Descriptions of advanced parameters for fine-tuning drive functions and performance.
List of fault codes, their descriptions, and suggested troubleshooting steps.
