Invisio V60 - Attachment and Fitting Instructions; Clip Options; Clip Adjustment Tool; Clip Attachment Direction Note

22 23
Attachment to Equipment Fitting To Molle Webbing
2 mm Hex Key
Use a 2 mm Hex Key to change the clip.
Different Clip
The V60 is supplied with a Molle clip as standard,
but dierent clips are available upon request.
Caution
Ensure the control unit is securely fastened to your equip-
ment, to avoid personal injury in the case of physical impact.
Do Not Stress Connections
Cables should be positioned without hard bends
at the connectors.
Place Through Webbing
The Molle clip is threaded through two Molle
straps, with the hook grasping the lower Molle
strap.
Note
The clip can also be rotated when mounting to allow the
V60 to be attached in dierent directions.