Invisio V60 - Audio Modes and Muting; Enabling Received Audio in Both Ears; Both Ears Mode Key Combo; Both Ears Mode Tones

To Next Page

To Previous Page

14 15

Key Combo

1. Press and Hold: Mode Button

2. Short Press: PTT2

3. Release: Mode Button

Received Audio in Both Ears

Received Audio can be swapped between split

and dual ear via a key combination.

Received Audio in Both Ears

Received Audio in Both Ears Mode is primarily intended for use

in high noise environments, whilst the default split ear audio is

primarily intended for use in low noise environments.

INVISIO IntelliCable

™

Received audio in both ears mode only works when INVISIO

IntelliCable™ settings are programmed to default audio routing.

Audio Tone

Both Ears On: 1 Beep

Both Ears O: 2 Beeps

Received Audio in Both Ears

Note

Some cables do not support Mute All Radios Mode.

Mute All Radios

All radios can be muted (-20 dB) via a key

combination.

Key Combo

1. Press and Hold: Mode Button

2. Short Press: PTT1

3. Release: Mode Button

Audio Tone

Mute: 1 Beep

Unmute: 2 Beeps

Exit Mute All Radios

To exit the Mute All Radios Mode, perform any of the following

actions:

• Key Combo

• Press any assigned PTT button

• Connect or disconnect any cable.

Mute All Radios

Note

While transmitting in Default or Swapped audio mode, all

received audio can be heard in one or both ears. Refer to

headset manual.