24
Countess
™
Automated Cell Counter Error
Codes
Introduction
This section describes the error codes displayed by the
Countess
™
automated cell counter when it encounters a problem.
Contact Technical Support (page 26) for details on error codes
and if you need
to send the instrument back for servicing.
Position Reason Message Error code
Camera driver loading fail 0101
Camera driver open fail 0102
Camera driver initializing fail 0103
Driver
GPIO driver loading fail 0104
Preview Camera preview fail 0201
Image buffer memory allocation
fail
0301
Memory
Camera memory allocation fail
System
Error
(E0101)
Reboot the
device or
refer to
service
personnel.
0302
To Next Page
Loading...
