29
This allows you to select the scene mode.
a) Press the (Enter) key until “Mode” is displayed.
b) To select the desired mode function, press the ▲
(Up) or ▼ (Down) button.
c) To confirm and exit the menu, press the (OK) key
d) Press the (Return) key to exit the selection without
saving.
Index selection.
a) Press the (Enter) key until “Index” is displayed.
b) Press the ▲ (Up) or ▼ (Down) button to select the
desired index.
c) To confirm and exit the menu, press the (OK) key
d) Press the (Return) key to exit the selection without
saving.
With this function you can activate the device.
a) Press the (Enter) key until “Enable” is displayed.
b) Press the ▲ (Up) or ▼ (Down) button until "On" or
"Off" is displayed.
c) To confirm and exit the menu, press the (OK) key
d) Press the (Return) key to exit the selection without
saving.
With this function you can set the time.
a) Press the (Enter) key until “Time” is displayed.
b) Press the ▲ (Up) or ▼ (Down) button to select the
desired time.
c) To confirm and exit the menu, press the (OK) key
d) Press the (Return) key to exit the selection without
saving.
With this function you can save the DMX values.
a) Press the (Enter) key until “Save DMX” is displayed.
b) Press the ▲ (Up) or ▼ (Down) buttons to confirm or
cancel the DMX storage.
c) To confirm and exit the menu, press the (OK) key
d) Press the (Return) key to exit the selection without
saving.
To Next Page
Loading...
