INVT CHV160A Series - Page 106

C.TY TNHH TỰ ĐỘNG HÓA VIỆT TRUNG 02413.281.181-
0989.984.666
Website:www.viet-trung.com.vn Đ/c:194-Nguyễn Trãi-Võ Cường-
TP.Bắc Ninh
start and switch motors according to the closed sequency of each terminal.
When the command is valid, relevant motor will be out of switch logic. It’s for repair.
Please refer to P8.27.
The signal is a kind of ON-OFF..W hen the sewage level is higher than upper limit,
sewage pump will be switched to run; If it is lower than lower limit, the sewage pump will
stop running.
When it is valid, PID0 (Defined by P3) will be switched to
41 PID switch
PID1 (Defined by PD), and the corresponding parameters of PID wll also be
switched.
54
DIEN DAN BIEN TAN HTTP://BIENTAN.HNSV.COM
CHV160A series special inverter for water supply
Setting
value
Function Description
42~50 Reserved
Function
Code