How to fix high static leakage current on INVT XD3TL?
To troubleshoot a high static leakage current in your INVT Inverter, try restarting the inverter to resume normal operation. If the issue persists, it may be due to grounding issues with the PV string, so verify that the PV string is reliably grounded.
What to do if INVT Inverter shows one-level under-voltage of AC power?
If your INVT Inverter reports one-level under-voltage of AC power, it may be due to a momentary issue with the power grid; the inverter should resume normal operation once the grid stabilizes. If the problem occurs frequently, check that the power grid is properly connected.
What causes high PV voltage on INVT XD3TL?
To address a high PV voltage issue on your INVT Inverter, check that the PV panel is properly connected and that the PV voltage does not exceed the inverter's maximum working voltage.
How to troubleshoot low PV voltage on INVT Inverter?
To solve a low PV voltage issue on your INVT Inverter, check the PV panel connections, inspect for any damage, and ensure the panel is free from dust or obstructions.
What to do if my INVT Inverter has an abnormal temperature?
If your INVT Inverter displays an abnormal temperature, check the inverter's temperature. If it is too high, cool it down before using it again.
Why is the BUS voltage high on my INVT XD3TL Inverter?
If your INVT Inverter shows a high BUS voltage, check whether the PV panel is connected properly, and whether the PV voltage is higher than the maximum working voltage of the inverter.
Why is there no AC voltage on my INVT Inverter?
If your INVT Inverter is not showing AC voltage, check that the AC power is properly connected.
What to do if my INVT Inverter displays a short circuit of EPS?
If your INVT Inverter displays a short circuit of the EPS, check whether the correct wire is connected properly to the EPS port.
Why is my INVT XD3TL showing a remote shutdown instruction?
If your INVT Inverter is being remotely shutdown, verify that no one is attempting to remotely shut down the inverter.
Symbols used to indicate potential safety risks and important safety instructions in the manual.
Guidelines and requirements for safe operation of the hybrid inverter, covering installation, wiring, and use.
Information regarding the target audience and recommended qualifications for installing and using the product.
General description of the hybrid inverter's purpose, capabilities, and supported models.
Detailed safety instructions for handling, installation, and operation of the hybrid inverter.
Illustrates the complete hybrid inverter system components and their interconnections.
Highlights the main functionalities and advanced features of the hybrid inverter.
Procedure for carefully checking the inverter and its accessories after unpacking.
Details on necessary installation tools and environmental conditions for proper inverter setup.
Guidelines for required clearance around the inverter for optimal airflow and accessibility.
Specifications and dimensions for the mounting bracket used for inverter installation.
Technical dimensions and net weight of the hybrid inverter unit.
Step-by-step instructions for securely mounting the inverter onto a wall.
Process for physically installing the inverter onto the prepared mounting bracket.
Overview of supported power grid systems and general connection principles for the inverter.
Instructions for connecting the photovoltaic (PV) modules to the inverter's DC input.
Guidance on connecting the inverter's AC output to the grid or load.
Procedure for connecting the battery power cables to the inverter.
Details on establishing communication links, including for lithium batteries and temperature sensors.
Steps for connecting the current transformer (CT) for energy monitoring.
Instructions for connecting a smart meter for monitoring home consumption.
Guidance on reliably connecting the grounding wire to the inverter for safety.
Step-by-step procedure for safely starting up the hybrid inverter system.
Instructions for safely shutting down the hybrid inverter system.
Overview of the menu structure and available information categories on the inverter's LCD screen.
Displays PV input voltage, current, and power readings.
Shows AC output voltage, frequency, current, and meter power.
Provides details on battery type, voltage, current, power, and state of charge (SOC).
Displays EPS output voltage, frequency, current, and load power.
Shows basic system information like date, time, model, SN, and firmware version.
Details daily and total energy generated, charged, and discharged.
Lists fault logs with codes, dates, and times for system diagnostics.
Information on accessing the setup menu, requiring a password entry.
Navigates to the main setting page after password entry.
Procedure for setting the system's date and time.
Instructions for configuring the communication address for the inverter.
Process for selecting the display language for the inverter interface.
Options for selecting CT mode or meter manufacturer for energy monitoring.
Configuration of battery parameters like voltage, current, and SOC for lead-acid or lithium batteries.
Selection of the country to comply with local safety standards and regulations.
Enabling or disabling the off-grid mode and setting EPS voltage and frequency.
Configuration of operational priority modes, such as Battery First or Grid First.
Procedure for running an auto test, available only for specific country settings.
Function to reset calibration data, energy, and fault history to default settings.
Description of the inverter's LCD screen layout and the function of its physical keys.
Explanation of different operating states like On-grid, Off-grid, Fault, and their characteristics.
Guidance on using the Solarman App for advanced parameter settings and monitoring.
Schedule and procedures for routine maintenance tasks to ensure inverter longevity.
Steps required to safely power down the inverter before performing maintenance.
Procedure for disconnecting and removing the inverter from its installation.
Guidelines for proper disposal of the inverter at the end of its service life.
Troubleshooting for low, high, or short-circuit PV voltage issues.
Actions for addressing low, high, or over-voltage errors on the BUS.
Resolving various over-current faults related to hardware, software, and boost circuits.
Troubleshooting abnormal inverter and boost temperatures.
Steps to resolve insulation monitoring errors, including grounding checks.
Procedure for resolving driver errors, typically involving restarting the inverter.
Addressing communication failures between system components.
Addressing faults related to static leakage current and external cables.
Steps to resolve open circuit or short circuit faults in the inverter's relays.
Troubleshooting internal fan failures within the inverter.
Resolving DCI errors, potentially involving grounding checks.
Addressing inconsistencies in AC voltage, BUS voltage, PV voltage, and GFCI values.
Diagnosing and resolving under-voltage and over-voltage errors of AC power.
Resolving issues with AC power under-frequency and over-frequency.
Checking for unauthorized remote shutdown instructions.
Troubleshooting Arc Fault Circuit Interrupter (AFCI) errors related to PV strings.
Resolving errors detected during the AFCI self-test phase.
Troubleshooting failures encountered during the automatic test sequence.
Addressing N-PE voltage errors, related to neutral-to-protective earth connection.
Resolving errors related to leakage current detected during self-test.
Troubleshooting errors related to the detection of PV string issues.
Resolving auxiliary power failures.
Checking for short circuits in the EPS port connection.
Troubleshooting low fan speed warnings, potentially indicating fan failure.
Troubleshooting communication issues with the smart meter.
Addressing grid voltage readings that fall outside the acceptable range.
Troubleshooting short circuits within the PV input.
Resolving overload conditions, particularly EPS overload.
Indicates the battery is fully charged; may be a status or a warning.
Troubleshooting low battery voltage conditions, requiring charging or priority checks.
Specifications related to battery type, voltage, and charging/discharging current.
Technical specifications for the inverter's DC input, including power and voltage ratings.
Technical specifications for the inverter's AC output, including power and current ratings.
Technical specifications for the inverter's EPS (Emergency Power Supply) output.
To Next Page
General