Single Phase Hybrid Inverter Installation
10
Please check the above items carefully, and contact your dealer immediately if you have any questions.
4.2 Preparations for Installation
4.2.1 Installation Tools
Table 4-2 List of Installation Tools
Drill holes in the mounting bracket or wall
Fix the inverter and tighten the junction box
Slotted screwdriver or Phillips
screwdriver
Measure the insulation performance and
resistance to ground
To test circuits and measure AC/DC voltage
To weld the communication cable
To crimp the AC O-terminal
4.2.2 Installation Conditions
(1) The inverter can be installed in an indoor or outdoor environment.
(2) During operation of the inverter, the housing and heat sinks will heat up. Do not install the inverter
where it can be accessed easily.
(3) Do not install the inverter in an area where flammable or explosive materials are stored.
(4) Install the inverter in a well-ventilated environment, so as to facilitate heat radiation.
(5) It is recommended to choose an installation position with shade, or build a sunshade.
To Next Page
Loading...
Need help?
General