Need help?Do you have a question about the INVT CHV160A Series and is the answer not in the manual?
General| Model | CHV160A Series |
|---|---|
| Power Range | 0.75kW to 630kW |
| Output Voltage | 3-phase 0~Input Voltage |
| Rated Output Current | Depends on model (refer to specific model datasheet) |
| Control Method | V/F control, Sensorless Vector Control (SVC) |
| Overload Capacity | 150% rated current for 60s, 180% rated current for 3s |
| Braking Unit | Built-in or external (depending on model) |
| Communication Interface | RS485, Modbus RTU, CAN |
| Protection Features | Overcurrent, Overvoltage, Undervoltage, Overheat, Overload, Short circuit, Ground fault, Phase loss |
| Cooling Method | Forced air cooling |
| Ambient Temperature | -10°C to +50°C |
| Storage Temperature | -20℃ to +60℃ |
| Humidity | 5% to 95% (non-condensing) |
| Altitude | Below 1000m (Derating required above 1000m) |
| Enclosure Rating | IP20 |
| Dimensions | Varies depending on the model within the series (See specific model datasheet) |
| Weight | Varies depending on the model within the series (See specific model datasheet) |
To Next Page