INVT CHV160A Series - Common Faults and Solutions

C.TY TNHH TỰ ĐỘNG HÓA VIỆT TRUNG 02413.281.181-
0989.984.666
Website:www.viet-trung.com.vn Đ/c:194-Nguyễn Trãi-Võ Cường-
TP.Bắc Ninh
reached
Too low resistance of external connected braking resistor.
Trial time which determined by factory
reached.
Increase braking resistance.
Contact supplier and ask for support.
LCD-E LCD is LCD is disconnected,the Press STOP/RST to
92
DIEN DAN BIEN TAN HTTP://BIENTAN.HNSV.COM
CHV160A series special inverter for water supply
Fault Code Fault Type Reason Solution
disconnected upload and download of parameter is carried out.
reset, connect LCD then download or upload parameter.
TI-E Clock chip fault Clock chip is damaged. Ask for support.
Reserved
7 . 2 Common Fau l ts and So l ut i ons
Inverter may have following faults or malfunctions during operation, please refer to the
following solutions.
No display after power on:
 Inspect whether the voltage of power supply is the same as the inverter rated
voltage or not with multi-meter. If the power supply has problem, inspect and solve
it.