INVT CHV160A Series - Page 149

C.TY TNHH TỰ ĐỘNG HÓA VIỆT TRUNG 02413.281.181-
0989.984.666
Website:www.viet-trung.com.vn Đ/c:194-Nguyễn Trãi-Võ Cường-
TP.Bắc Ninh
Factory
Setting
P9.01
STEPS
1~8 1~8 1
The parameter set the segment numbers of pressure, only T1 is the default, namely one
pressure segment is effective all day.W hen several segments are selected, it means
multi-segment pressure is effective, and the setting is repeated everyday.
The parameter is for setting the pressure segment and corresponding pressure.
1. Principle of setting time: T1≤T2≤T3≤T4≤T5≤T6≤T7≤T8
2. Segment T1 is the time from threshold T1 to threshold T2, segment T2 is the time from
threshold T2 to threshold T3, and so forth, segment T8 is the time from threshold T8 to
threshold T1.
3. If threshold of one segment is same as ultimate of previous segment, the segment is
invalid, and they are merged as one segment.
4. If the segments are equal, only one segment is effective everyday.
Function
Code
Name Description
Setting
Range
Factory
Setting
P9.18 MULTI SET 0 0.0 ～ 100.0% 0.0 ～ 100.0 0.0%
P9.19 MULTI SET 1 0.0 ～ 100.0% 0.0 ～ 100.0 0.0%
P9.20 MULTI SET 2 0.0 ～ 100.0% 0.0 ～ 100.0 0.0%
P9.21 MULTI SET 3 0.0 ～ 100.0% 0.0 ～ 100.0 0.0%