INVT CHV160A Series - Page 172

C.TY TNHH TỰ ĐỘNG HÓA VIỆT TRUNG 02413.281.181-
0989.984.666
Website:www.viet-trung.com.vn Đ/c:194-Nguyễn Trãi-Võ Cường-
TP.Bắc Ninh
RESET
1: Enabled
0~1 0
PC.08
INTERVAL
0.1~100.0s 0.1~100.0 1.0s
Auto reset function can reset the fault in preset times and interval. When PC.06 is set to be
0, it means “auto reset” is disabled and the protective device will be activated in case
of fault.
PC.07 defines if fault relay active or not during auto reset. If continuous production
without interruption is needed, please set PC.07=0.
Notice:
 The fault such as OUT 1, OUT 2, OUT 3, OH1 and OH2 cannot be reset
automatically.
84
DIEN DAN BIEN TAN HTTP://BIENTAN.HNSV.COM
CHV160A series special inverter for water supply
 If fault has not occurred for ten minutes after the fault is reset, inverter
will automatically clear the previous times of auto reset.
Function
Code
Name Description
Setting
Range
Factory
Setting