INVT CHV160A Series - Page 212

C.TY TNHH TỰ ĐỘNG HÓA VIỆT TRUNG 02413.281.181-
0989.984.666
Website:www.viet-trung.com.vn Đ/c:194-Nguyễn Trãi-Võ Cường-
TP.Bắc Ninh
Value Name Mean
received by slave.
Note: This error code does not indicate the data value to
write exceed the range, but indicate the message frame is
a illegal frame.
06H Slave busy Inverter is busy(EEPROM is storing)
10H
Password error
The password written to the password check address is not same as the password set
by P7.00.
The CRC (RTU mode) or LRC (ASCII mode) check not
11H Check error
Written not
12H
allowed.
System
13H
locked
passed.
It only happen in write command, the reason maybe:
1. the data to write exceed the range of according parameter
2. The parameter should not be modified now.
3. The terminal has already been used.
When password protection take effect and user does not unlock it, write/read the