INVT CHV160A Series - Page 56

C.TY TNHH TỰ ĐỘNG HÓA VIỆT TRUNG 02413.281.181-
0989.984.666
Website:www.viet-trung.com.vn Đ/c:194-Nguyễn Trãi-Võ Cường-
TP.Bắc Ninh
Function
Code
Name Description
0: A
Setting
Range
Factory
Setting
P0.05
FREQ SELECTION
1: B
2: A+B
3: Max(A, B)
0~3 0
This parameter can be used to select the reference frequency command.
0: Only frequency command source A is active.
1: Only Frequency command source B is active.
2: Both Frequency command source A and B are active.
Reference frequency = reference frequency A + reference frequency B.
3: Both Frequency command source A and B are active.
Reference frequency = Max (reference frequency A, reference frequency B).
Notice: The frequency command source can be selected not only P0.05 but also
by multifunctional terminals. Please refer to description of P5 Group.
33
DIEN DAN BIEN TAN HTTP://BIENTAN.HNSV.COM