INVT CHV160A Series - Page 63

C.TY TNHH TỰ ĐỘNG HÓA VIỆT TRUNG 02413.281.181-
0989.984.666
Website:www.viet-trung.com.vn Đ/c:194-Nguyễn Trãi-Võ Cường-
TP.Bắc Ninh
Notice:
 The factory setting is optimal in most cases. Modification of this parameter is
not recommended.
 If the carrier frequency exceeds the factory setting, the inverter must be
derated because the higher carrier frequency will cause more switching loss,
higher temperature rise of inverter and stronger electromagnetic
interference.
 If the carrier frequency is lower than the factory setting, it is possible to
cause less output torque of motor and more harmonic current.
Function
Code
Name Description
0: No action
Setting
Range
Factory
Setting
P0.14
0: No action
RESTORE
PARA
1: Restore factory setting
2: Clear fault records
0~2 0
1: Inverter restores all parameters to factory setting except P2 group.