INVT CHV160A Series - Page 67

C.TY TNHH TỰ ĐỘNG HÓA VIỆT TRUNG 02413.281.181-
0989.984.666
Website:www.viet-trung.com.vn Đ/c:194-Nguyễn Trãi-Võ Cường-
TP.Bắc Ninh
Factory
Setting
P1.03
P1.04
CURR
START BRAK TIME
0.0~150.0% 0.0~150.0 0.0%
0.0~50.0s 0.0~50.0 0.0s
When inverter starts, it performs DC braking according to P1.03 firstly, then start to
accelerate after P1.04.
Notice:
 DC braking will take effect only when P1.00 is set to be 1.
 DC braking is invalid when P1.04 is set to be 0.
 The value of P1.03 is the percentage of rated current of inverter. The bigger
the DC braking current, the greater the braking torques.
Function
Code
Name Description
0: Deceleration to stop
Setting
Range
Factory
Setting
P1.05 STOP MODE
0: Deceleration to stop