INVT Goodrive350-19 Series - Page 394

Goodrive350-19 series VFD Function parameter list
- 387 -
Function
code
Name
Description
Default
value
Modify
rate is equal to or less than P93.34.
P93.34 setting range: 0.0–100.0%/s
P93.35 setting range: 0.00–50.00Hz
P93.36 setting range: 0.00–10.0s
Note: Stable lifting is valid only for upward
running.
P93.37
Stable lifting
torque change
ratio protection
point 3 (exiting
stable lifting)
10.0%/s