ION Audio Block Rocker
®
User Guide 19
If this does not work, and you have connected to Block Rocker® before, find Block Rocker®
in the list of available or previously connected devices in your audio device's Bluetooth
menu, tap the "gear" or “i” icon located next to it and then select U
npair or Forget. Turn
Block Rocker® o and back on and try pairing again once it reappears in your available
devices list.
Note: If Block Rocker® has been paired to another audio device recently that is still within
range, you may need to repeat this process with that audio device to fully disconnect.
I
f you experience audio dropouts while playing music from a Bluetooth device, this may be
happening because your unit is trying to link to another speaker. This can occur if you power
o a speaker that was linked to your unit or if you have just turned on your unit and it is in
Stereo-Link™ mode. To stop the audio dropouts, exit Stereo-Link™ mode by double-pressing
the S
tereo-Link™
button. Alternatively, you can wait for your unit to link to another speaker if
there is one within range.
To Next Page
Loading...
