ION Explorer Express User Manual

ION Audio Explorer™ Express User Guide 11
Pairing a Bluetooth® Device
1. Turn on your Bluetooth device.
2. Power on Explorer™ Express by holding down the P
ower button for 2 seconds. When the unit
is first turned on, it will automatically enter Bluetooth pairing mode. If necessary, press the
Source button to select Bluetooth mode. The Bluetooth icon on the display will flash to
indicate the speaker is ready to pair and if voice prompts are enabled, you will hear
“Bluetooth Pairing.”
3. Navigate to your device’s Bluetooth setup screen, find E
XPLORER EXPRESS, and connect.
The B
luetooth icon will appear in the display, and if voice prompts are enabled, you will
hear “Bluetooth Connected”.
Note: If your Bluetooth device prompts for a pairing code, enter “0000”.
T
o disconnect a paired device, do any of the following:
• Turn o Bluetooth from your device’s Bluetooth settings. The speaker will enter
Bluetooth pairing mode to make it available for another device.
• Double-press the Bluetooth button to disconnect and re-enter pairing mode.
• Briefly press the Bluetooth button to disconnect and enter Aux mode.
Once you have disconnected, the Bluetooth icon will return to flashing, and you will hear
“Bluetooth Disconnected” if voice prompts are enabled.
Tip: Press and hold the Bluetooth button to turn voice prompts on or o.
1 - PRESS
2
3
EXPLORER™ EXPRESS

ION Explorer Express Specifications

General

Brand	ION
Model	Explorer Express
Category	Portable Speakers
Language	English