ION Explorer Express User Manual

ION Audio Explorer™ Express User Guide 12
Linking Two Speakers
If you would like to play music from a Bluetooth device, you can first “link” two Explorer™
Express speakers together in order to listen to your music in stereo. One Explorer™ Express
will serve as the left speaker and the other will serve as the right speaker.
T
o link two Explorer™ Express speakers together:
Note: When you begin the Stereo-Link™ process, any connected Bluetooth devices will be
automatically disconnected. You can also disconnect your device prior to beginning by
double-pressing the Bluetooth button.
1. Press and hold the S
tereo-Link™
/ Repeat button on both speakers to enter Stereo-Link™
mode. You will hear a tone and the S
tereo-Link™ and Bluetooth icons on each speaker’s
D
isplay will begin flashing while they search for each other.
Note: The linking process can take up to 30 seconds to complete. The closer the two
speakers are to each other, the quicker the link is established.
2. Press and release the B
luetooth button on either speaker to select Bluetooth mode and
begin the Bluetooth pairing process. The speaker you use for Bluetooth pairing will serve
as the primary speaker.
3. Navigate to your Bluetooth device’s setup screen, find E
XPLORER EXPRESS, and connect.
The Bluetooth icon on the primary speaker will flash to indicate it is searching for a
Bluetooth device to pair with.
When the connection is successful, you will hear "Bluetooth Connected" from the primary
speaker (if voice prompts are enabled). When audio playback begins, you should hear it
through both speakers. The primary speaker will play the left channel while the secondary
speaker plays the right channel. Playback controls are active on both speakers.
1 - DOUBLE PRESS
(on each speaker)
2 - PRESS & HOLD
(on each speaker)
3 - PRESS AND RELEASE
(on each Primary speaker)
4
EXPLORER™ EXPRESS

ION Explorer Express Specifications

General

Brand	ION
Model	Explorer Express
Category	Portable Speakers
Language	English