29
5.4.10. HC Heating Switch
Turn on/off the controller LCD back heater. When “Heating ON” is selected, the heater will
automatically be turned on when the ambient temperature reaches 0°C (32°F) and shut off at 10°C.
5.4.11. Set RA Guiding
The function is for CEM120EC only. You can turn off R.A. guiding by selecting “Filter R.A.
Guiding” to allow the high precision encoder to correct the tracking error, or turn the R.A. guiding on by
selecting “Allow RA Guiding” to allow the mount to receive guiding corrections from the guiding
software. The power on default setting is “Allow RA Guiding”.
5.4.12. Network Options
This function will display WI-FI and LAN status.
Wireless Status: displays WI-Fi network parameter after a computer/tablet/SmartPhone
connected to the mount. The CEM120 network SSID is HI-LINK_XXXX, password
12345678. If the status does not display, select and press Manual Refresh to refresh. Here
is a example screen after connection:
Wired Status: display LAN parameters after the mount is connected to a network/router. If
the status does not display, select and press Manual Refresh to refresh. Here is a example
screen after connection:
Manual Refresh: Refresh mount netwark parameter after connection.
Restart: restart the network adapter
Restore to Factory: restore the factory network setting
5.4.13. Power LED Switch
Use this setting to keep the mount power indicator (LED) on during the operation, or turn it off
automatically after 1 minute
5.4.14. Reset All Settings
Reset all the settings to factory default.
5.4.15. Language
Select one of supported menu languages. Currently has English and Chinese.
ETH:AP
IP:192.168.0.61
PORT:8080
MAC:08:EA:40:83:9E:49
Press BACK to exit
Wlan:AP
SSID:HI-LINK_9E49
IP:192.168.16.254
PORT:8080
MAC:08:EA:40:83:9E:48
Press BACK to exit
To Next Page
Loading...
