iOptron CEM120 - CEM120 Terms and Components; Parts List and Shipping Contents

7
2. CEM120 Terms
2.1. Parts List
1
SHIPPING CONTENTS
Your new CEM120 mount comes in two shipping boxes. One box contains either a CEM120
(#7300), CEM120EC (#7301) or CEM120EC2 (#7302) mount head, hand controller, and accessories.
The other box contains a 22lb (10kg) counterweight and counterweight shaft. The contents are:
 1X iOptron
®
CEM120 telescope mount (#7300, with silver adjustment knobs), iOptron
®
CEM120EC mount (#7301, high precision model with red adjustment knobs), or iOptron
®
CEM120EC2 mount (#7302,dual high precision model with red adjustment knobs)
 1X Go2Nova
®
8407 V2 Hand Controller
 1X 22lb (10 kg) counterweight
 1X Stainless steel counterweight shaft
 1X 12V/5A AC/DC adapter (100V-240V, with 2.5mmX5.5mm plug)
 1X Hand Controller Cable (6P6C RJ11 to RJ11, straight wired)
 1X Serial cable (RS232 to RJ9)
 4X Base mounting screws
 1X external GPS antenna
 1X Wi-Fi external antenna
OPTIONAL PARTS
 Electronic polar scope adapter (#3337-120)
 Pier top mounting plate
 USB to RS232 Converter with FTDI chipset (#8435)
ONLINE RESOURCES (click on the “Support” menu at www.iOptron.com)
 Quick Start Guide
 Instructional manual
 Tips for set up
 Hand controller and mount firmware upgrades (check online for latest version)
 iOptron ASCOM driver
 Reviews and feedback from other customers
 Accessories
1
US market only. Actual contents may vary.