nanoLTE S60 AP Hardware Installation Installation Overview and Requirements
NANO_INST_43315 v200_0.5 for N4G_2.0 © ip.access Limited 2017 Page 5
If the NOS is configured for HTTPS access to the Certificate Validation Service for CRL
Mirror server functionality, the AP will also need to use this port outside of the IPsec tunnel:
Port Usage Without IPsec
Without IPsec, the following ports are used:
This assumes the AP is on a secure network that does not need IPsec. For example, a
self-contained test network.
Protocol Destination Port Use
tcp 443 HTTPS for CRL download from the NOS
Protocol Destination Port Use
sctp 36412 SCTP connection
udp 2152 PS GTP from AP
udp 2152 PS GTP to AP
tcp 8080 or 7547 TR-069 to the NOS (the NOS listens for TR-069
connections on both ports)
tcp 80 PM upload, software download, CRL download, AP
diag upload
To Next Page
Loading...
Need help?
General
