nanoLTE S60 AP Hardware Installation Introduction
NANO_INST_43315 v200_0.5 for N4G_2.0 © ip.access Limited 2017 Page 1
1 Introduction
The ip.access nanoLTE S60 AP is an indoor Access Point for SOHO and enterprise small
cell applications.
This manual provides all the necessary information required for hardware installation of a
nanoLTE S60 AP.
1.1 Overview
This manual is organised as follows:
• This introduction
• An overview of nanoLTE S60 AP installation, including site requirements
• nanoLTE S60 AP hardware installation
• Troubleshooting
• Regulatory warnings and safety information
1.2 Warnings and Regulatory Information
For all warnings and regulatory information, see section 5.
1.3 Related Information
1.4 Licenses and Copyright Notices
Portions of the AP are constructed from third-party software and open source code and
ip.access Ltd gratefully acknowledges the contributions that these libraries, technologies
and components have made to the product. Each of these is supplied under the terms of a
license agreement and these are either reproduced or referenced in [REF_43005], in line
with the stipulations of their authors.
1.5 Terminology
Common System terminology is defined in [REF_11105].
For additional terminology, see [21.905].
[GST_41050] nanoLTE System Planning (NANO_GST_41050)
[INST_43370] nanoLTE AP Pre-Provisioning and Configuration (NANO_INST_43370)
[OPM_43005] nanoLTE AP Operations (NANO_OPM_43005)
[REF_11105] System Glossary (NANO_REF_11105)
[REF_43005] nanoLTE AP Open Source Software (NANO_REF_43005)
[TRB_43005] nanoLTE AP Troubleshooting (NANO_TRB_43005)
[21.905] Vocabulary for 3GPP Specifications (3GPP TR 21.905)
To Next Page
Loading...
Need help?
General
