Need help?Do you have a question about the IpCAS USB Floppy and is the answer not in the manual?
General| Brand | IpCAS |
|---|---|
| Model | USB Floppy |
| Category | Computer Hardware |
| Language | English |
The core product being described.
Indicates system reading or writing status.
Indicates voltage supply connection.
Shows disk drive or selected floppy status (00-99).
Connects USB Stick data carrier.
Connects the +5V DC power supply.
Connects the floppy disk drive controller via 34-pin cable.
Details of GND, +5V, and numbered interface pins.
Configures the disk drive operating mode.
Configures the Ready signal level.
Indicates disk drive waits for USB Stick.
Indicates potential voltage supply issue.
Suggests connection or jumper configuration problems.
Various error codes for voltage, format, or data volume.
Normal state after USB Stick recognition.
May indicate contact failure or incorrect USB Stick.
Normal during read/write; avoid removing USB Stick.
Likely due to pressing selection button too long.
Caused by premature USB Stick removal.
Occurs when there's insufficient space on the virtual floppy.
To Next Page