iPECS ES-3052GP - Page 86

C HAPTER 3 | Using the Web Interface
Navigating the Web Browser Interface
– 86 –
ES-3052 Series
VoIP Voice over IP 271
Configure Global Configures auto-detection of VoIP traffic, sets the Voice VLAN, and
VLAN aging time
272
Configure OUI 273
Add Maps the OUI in the source MAC address of ingress packets to the
VoIP device manufacturer
273
Show Shows the OUI telephony list 273
Configure Interface Configures VoIP traffic settings for ports, including the way in
which a port is added to the Voice VLAN, filtering of non-VoIP
packets, the method of detecting VoIP traffic, and the priority
assigned to the voice traffic
275
Packet Flow Protects against DoS attacks in which the UDP or TCP source port
or destination port is set to zero
377
Security 279
AAA Authentication, Authorization and Accounting 280
System Authentication Configures authentication sequence – local, RADIUS, and TACACS 281
Server 282
Configure Server Configures RADIUS and TACACS server message exchange
settings
282
Configure Group 282
Add Specifies a group of authentication servers and sets the priority
sequence
282
Show Shows the authentication server groups and priority sequence 282
Accounting Enables accounting of requested services for billing or security
purposes
287
Configure Global Specifies the interval at which the local accounting service updates
information to the accounting server
287
Configure Method 287
Add Configures accounting for various service types 287
Show Shows the accounting settings used for various service types 287
Configure Service Sets the accounting method applied to specific interfaces for
802.1X, CLI command privilege levels for the console port, and for
Tel ne t
287
Show Information 287
Summary Shows the configured accounting methods, and the methods
applied to specific interfaces
287
Statistics Shows basic accounting information recorded for user sessions 287
Authorization Enables authorization of requested services 292
Configure Method 292
Add Configures authorization for various service types 292
Show Shows the authorization settings used for various service types 292
Configure Service Sets the authorization method applied used for the console port,
and for Telnet
292
Table 6: Switch Main Menu (Continued)
Menu Description Page