iPECS LDP-9030D - Headset;Bluetooth and Speaker;Headset Settings

6. HEADSET/BLUETOOTH
Menu
Press [OK] or [Hold/Save] button.
5 MOBILE/CONFERENCE ROOM
6> HEADSET/BLUETOOTH
OK EXIT
1 > SPEAKER/HEADSET PGM
2 HEADSET RING PROGRAM
BACK OK EXIT
3 > REGISTER BLUETOOTH
BACK OK EXIT
Press [Volume] button.
6.1 SPEAKER/HEADSET PGM
Press [OK] or [Hold/Save] button.
BACK
OK
EXIT
1 > SPEAKER/HEADSET PGM
2 HEADSET RING PROGRAM
Select Mode.
0 : Speaker / 1 : Headset / 2 : E-MIC or Bluetooth
Press [OK] or [Hold/Save] button.
BACK OK EXIT
SPK/HEADSET MODE (2)
SPK (0) H-SET(1) E-MIC(2)
BACK OK EXIT
Press
[OK]
or
[Hold/Save]
button.
※ If BTU module is installed, you can see and select BTU(2) instead of E-MIC(2).
6.2 HEADSET RING MODE
Press [OK] or [Hold/Save] button.
Select Mode.
0 : Speaker / 1 : Headset / 2 : Both
1 SPEAKER/HEADSET PGM
2> HEADSET RING PROGRAM
BACK OK EXIT
SELECT HEADSET RING (0)
32
0
:
Speaker
/
1
:
Headset
/
2
:
Both
Press [OK] or [Hold/Save] button.
SPK (0) H-SET(1) BOTH (2)
BACK OK EXIT