LIP-9000 Series User Guide - ST 29
5: Remote – My station forward setting is possible at another person’s
station. In this case, my station authorization code should be entered.
6: Unconditional – all calls to the station, except recalls, are forwarded.
7: Busy – Immediately forwards all calls, except recalls, when the station
is busy.
8: No Answer – forwards all calls to the station, except recalls, when the
station does not answer within the No Answer timer.
9: Busy/No Answer – forwards all calls to the station, except recalls,
when the station does not answer within the No Answer timer.
10: Incoming CO Off-Net – A certain CO incoming call can be forwarded
to a SPEED number. This setting is allowed in only Attendant station.
When you forward calls from a different station or a remote location, enter
your Authorization Code. In addition, from a remote location, you must
access the system through a DISA enabled CO line.
To activate Call Forward, Off Premise (forward to an external number)
from your phone:
Lift the handset,
Press the FORWARD Soft button or the DND button,
Dial the type of Forward code (0-5),
Press the SPEED button,
Dial Speed Dial bin number,
Replace the handset, return to idle.
To activate Call Forward, Off Premise (forward to an external number)
from a different phone within the System:
Lift the handset,
Press the FORWARD Soft button or the DND button,
Dial 0 (Remote Call Forward code),
Dial your Authorization code (your Station number + Password),
Dial the type of Forward code (1-4),
Press the SPEED button,
Dial Speed Dial bin number,
Replace the handset, return to idle.
To Next Page
Loading...
